DIY Rainwater
The No-Nonsense Beginner's Guide to Catching Rain and Filtering It Wild
Clear is not the same as safe. Boil what you drink.
Rain that's just fallen is cleaner than a puddle, but once it has run across a tarp, a rock or a leaf it isn't sterile. This plain-English field manual gives you one catch, one filter and one rule that doesn't bend.
You'll learn how to:
- Rig a sheet with three corners up and one down, and dump the first wash that rinses off dust and droppings
- Work out how much a sheet can really catch (1 m² in 10 mm of rain is about 10 litres)
- Choose and rinse charcoal: plain lump from clean wood, never briquettes or garden char
- Build a bottle or bucket filter from four rock sizes, in the right order, and run the throwaway litres
- Boil correctly: a rolling boil for about one minute, about three minutes above roughly 2,000 m
- Spot algae-bloom water (boiling doesn't destroy cyanotoxins) and sheets that can put chemicals in the water
- Add calcium and magnesium back conservatively, after the boil, from a product made for drinking water
The safety chapter comes first, with stop rules a tired, thirsty person can follow. Estimates are marked [EST], items to check are marked [verify], and there are hand-friendly tips for cold fingers and weak grip.
For hikers, campers, preppers and off-grid beginners. Book 2 of the No-Nonsense DIY series.
Book Info
No download link available yet. You can .
Related Books
Similar recommendations you might enjoy