Fundamentals of HVAC Water Chillers and Cooling Towers
A Plant-Room Reference to Hydronic Distribution, Heat-Rejection Control, and Fault Isolation for Mechanical Technicians
A central chilled-water plant is only as reliable as the technician’s ability to connect heat flow, water flow, refrigeration, controls, and water chemistry.
Fundamentals of HVAC Water Chillers and Cooling Towers gives mechanical technicians, operating engineers, facility engineers, commissioning providers, and advanced HVAC students a practical route through those connections. It develops the plant as one interacting system, so a symptom at the evaporator, condenser, pump, tower, electrical service, or building automation system can be traced to evidence instead of guesswork. The exclusive Plant-Side Cause Map turns that system view into a repeatable diagnostic method: identify the signal, test the most discriminating measurements, isolate the responsible subsystem, and verify the correction under stable conditions.
Inside, readers will learn how to:
Convert flow and temperature difference into cooling load, then check whether the result agrees with equipment and trend data.
Interpret vapor-compression and absorption cycles, compressor behavior, heat-exchanger approach, lift, and part-load performance.
Diagnose primary-secondary and variable-primary hydronic systems, including low delta-T, bypass flow, valve authority, pump interaction, and sensor error.
Evaluate cooling-tower range, approach, wet-bulb limits, fan control, cell staging, condenser-water reset, and heat-rejection penalties.
Connect piping, pumps, valves, motors, starters, variable-frequency drives, safeties, local controllers, and BAS sequences to actual plant behavior.
Manage cycles of concentration, scale, corrosion, biological growth, filtration, blowdown, closed-loop chemistry, and Legionella risk within a documented water-management program.
Plan startup, functional testing, baseline development, seasonal shutdown, predictive maintenance, and persistent commissioning.
Use step-by-step worked examples, native equation callouts, comparison tables, diagnostic maps, and chapter decision recaps during study or plant-room work.
The chapters follow the way plant evidence actually develops. A load calculation leads to a question about flow accuracy; a high condensing temperature leads to tower, water-side, and refrigeration checks; an unstable differential-pressure loop leads to sensor location, valve response, pump speed, and sequence review. This progression helps readers separate a true equipment fault from a control problem, an operating constraint, or a misleading measurement. Current industry standards are placed in tir practical context without interrupting the plant-room focus, and every safety-critical topic directs the reader toward documented procedures, qualified personnel, and site-specific requirements.
From first principles to whole-plant optimization, this reference equips readers to explain what the plant is doing, determine why performance changed, and choose corrective action that protects capacity, efficiency, equipment life, water quality, and occupant safety. It supports day-to-day operations, structured troubleshooting, commissioning preparation, technician development, and review for professional practice.
Book Info
No download link available yet. You can .
Related Books
Similar recommendations you might enjoy